Alarm Operation; Adjusting The Display Brightness - iHome HiH60 Manual

A Consumer Guide to Product Safety
2
Setting the Alarm
1. Press the  Alarm Set Button. The wake time will flash on the lower part of display.
2. Press the or Button to set the desired alarm time (hold to advance the time quickly).
3. Press the  Alarm Set Button again to confirm setting. The alarm is now armed , indicated by
the alarm icon.
4. After setting the alarm time, press the  Wake To Button to select iPod, radio or Buzzer as
your alarm source.
5. iPod alarm will sound continually for 1 hour, radio/buzzer alarm will sound continually for 15
minutes.
Turning the Alarm On or Off
Press the  Alarm On/Off Button to arm or disarm alarm function. When armed, the time and
alarm source will appear on the bottom part of display.
One Day Alarm
This unit features a one day alarm: once the alarm sounds, it is disarmed and must be set again to
come on the following day. This prevents guests waking to unwanted alarm.
Snooze
Press the  Snooze/Dimmer button after the alarm sounds. The alarm will be silenced and come
on again 9 minutes later. Snooze can be pressed several times during the 1 hour iPod alarm period.
Sure Alarm
This unit has a sure alarm feature. If backup batteries are installed, the buzzer alarm will sound in
the event of a power failure/interruption.

Adjusting the Display Brightness

This unit features an adjustable backlight, with dim, medium and bright settings. To select a backlight setting,
press the  Snooze/Dimmer Bar until the desired brightness is reached.

Alarm Operation

7
when alarm is armed
when alarm is not armed