Escort Passport Max2 Owner's Manual page 25

Installation
Mounting Tips:
• Center of windshield between driver and
passenger.
• Ensure clear view of road ahead and sky
above.
• Avoid windshield wipers and heavily tinted
areas.
To mount PASSPORT Max2 in your vehicle:
1 Remove backing from StickyCup mount.
2 Firmly press StickyCup onto windshield and
fl ip locking clamp to secure.
3 To adjust view, loosen thumb wheel and
adjust angle of mounting bracket. Tighten
thumb wheel to secure.
4 To remove detector, press mount release
button on PASSPORT Max2 and slide device
off mount.
6 To remove mount from windshield, release
locking clamp and pull tab on top of
StickyCup.
StickyCup Care Instructions:
To clean your StickyCup, simply rinse under
warm water, gently wipe off any debris and
allow to air dry.
5
StickyCup
Locking Clamp
Thumb Wheel For
Angle Adjustment
Mounting Bracket