Specifications - JEFF ROWLAND CONTINUUM 250 Owner's Manual

S P E C I F I C A T I O N S
OW N E R ' S M A N UA L C o n t i n u u m 2 5 0/ 5 0 0 i n t e g r at e d a m P L i F i e r
Output Power, Continuous RMS watts,
both channels driven
Frequency Response
Peak Output Current
Dynamic Range
Load Impedance Range
Input Impedance
THD and Noise, 0.1 watts to Maximum Output
Dampening Factor @ 1 kHz
Gain Structure
Volume Control Range
Volume Control Resolution
Common Mode Rejection Ratio
Inputs
Outputs
Power Consumption
Power Supply
Amplifier Weight
Overall Amplifer Dimensions (H) x (W) x (D)
18
P O B OX 7 2 3 1 , C O LO R A D O S P R I N G S , C O LO R A D O 8 0 9 3 3 U S A
250 watts @ 8 ohms / 500 watts @ 8 ohms per channel
500 watts @ 4 ohms / 1000 watts @ 4 ohms per channel
5 Hz – 60 kHz, -3 dB @ 8 ohms / 5 Hz - 45 kHz, -3 dB @ 8 ohms
35 amps / 40 amps
117 dBa / 120 dBa
3 ohms -16 ohms
48 k ohms
< 0.05%, Typically .006% @ 1kHz / < 0.1%, Typically .01% @ 1kHz
> 1000 / >1000
Preamplifier Section 14 dB, Amplifier Section 26 dB
99.5 dB
0.5 dB +/- 0.05 dB Over Entire Range
> 85 dB, 20 Hz to 20 kHz
2 pair Balanced (XLR), 2 pair Unbalanced (RCA)
1 pair Unbalanced (RCA), Unity Gain (Bypass)
1 pair Balanced (XLR), 1 pair Unbalanced (RCA)
1 pair CE-Approved Speaker Wire Clamp
Idle - 25 watts, Max - 1000 watts / Idle - 35 watts, Max - 2000 watts
Switch Mode (SMPS) / Switch Mode (SMPS) with active power factor correction
(PFC) and universal AC input voltage
41 lbs. / 18.6 kg / 44 lbs. / 20 kg
5.3" x 15.5" x 15.6"
135mm x 394mm x 396mm
E - m A I L : j R D G @ j E f f R O w L A N D . C O m w w w. j E f f R O w L A N D . C O m T E L E P H O N E ( 7 1 9) 47 3 -1 1 8 1