Page 1
Teachers/Staff Ver. 1.3 OS X This guide is intended to help you set up the Linksys Wireless Router in your home. You will then be able to use your QV laptop wirelessly in your home as well as share your Internet connection with any other computers you may have.
Page 2
Technology Department B. Making the Connections. The first step is to power-down your cable/DSL modem by unplugging it, and turning off your computers. The next step is to connect the cable/DSL modem to the router. Your modem is most likely connected directly to your home computer with an Ethernet cable at this time.
Page 3
School when you are at work. 3. Click on the Airport symbol at the top right-hand side of your screen and select linksys. You will only need to do this once. The laptop should automatically recognize the router after the first time.
Page 4
School when you are at work. 3. Click on the Airport symbol at the top right-hand side of your screen and select linksys. You will only need to do this once. The laptop should automatically recognize the router after the first time.
Page 5
Technology Department 6. You will now be in the Linksys router set up pages. These pages are used to set a few parameters to get the router to work with your DSL providers network. You will need to know several bits of information to complete this step. In most cases your DSL provider is the only place to get this information.
Technology Department Troubleshooting 1. If you are having trouble setting up your router the best resource is your Internet Service Provider, not your BTC. Because here are many variables involved and different ISP’s the building BTC may not be able to provide the information that the ISP can.