LG DLEX3570 series Owner's Manual page 49

Before Calling For Service (cont.)
Steam does not
generate but
no error code is
shown
Garments still
wrinkled after of garments in dryer.
STEAM FRESH™
There are no
creases left on remove wrinkles from fabric.
garment after
STEAM FRESH™
Garments have
static after
REDUCE STATIC
Garments are
too damp or selected.
too dry after
REDUCE STATIC
Garments are Number of garments or load
not uniformly size not properly selected at the
beginning of the cycle.
damp after
EASY IRON
Water drips
from door
during Steam
Cycle
Steam is not
visible during
Steam Cycle
Drum does not
turn during
Steam Cycle
Cannot see
steam vapor at
the beginning
of cycle
STATIC option.
starting the cycle.
dryer door during steam operation. Some condensation
may drip out the bottom of the door.
However, condensation will normally form on the inside of
the dryer door if the steam system is operating normally.
once a minute.
option.
TROUBLESHOOTING
49