Downloading Images To A Computer; Starting Imagebrowser - Canon PowerShot G2 User Manual

Downloading Images to a Computer

This topic briefly explains how to use ImageBrowser to perform a range of operations
from downloading the camera's images to printing them.
• For a more detailed explanation, please see the ImageBrowser Help menu
or PDF manual, ImageBrowser Software User Guide (p. 4).
If the Continue Connection Confirmation Message Displays
• When a connection is open between the camera and computer via the USB
interface and the camera is not accessed for approximately 5 minutes, the
confirmation message will display. If you do not do anything, the camera will
disconnect after approximately 1minute. (The message will not appear and the
camera will not disconnect if the camera is powered from a household power
source.)
Press the camera's shutter button or main switch to reconnect. Please see the Camera
User Guide for more information.
○ ○ ○ ○ ○ ○ ○ ○

Starting ImageBrowser

USB Port Connection
1.
Attach the supplied USB cable to the computer's USB port and the
camera's Digital Terminal, and set the camera to Replay mode.
• For USB interface connection instructions, see "Connecting to a USB Port" (p. 16).
• ImageBrowser will start and open the ImageBrowser Automation Wizard
dialog.
2.
Confirm that [Display Images] is selected and click the [OK] button.
The Communications Settings dialog will display. This dialog only appears
the first time the camera is connected.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Confirm that this
option is selected.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
69
○ ○