Wiring the WM-2 Weather Module
Wiring guidelines
Don't do this
Don't make sharp bends in
the cables.
Don't run cables in a way
that allows water to flow
down into the connectors.
Don't route the data cables
in areas adjacent to radar,
transmitter, or large current
carrying cables.
Don't cut or modify the
antenna cable
Connectors overview
A
Key
A
Audio out: line level audio out. Connect to onboard
amplifier and speakers using the provided cable.
B
Network. Connect to the display system's Ethernet
network.
C
Sirius satellite antenna connector.
D
Power: Connect to 12 or 24 v DC. The WM-2 is pro-
tected by an internal auto resetting fuse. Connect to a
breaker or fuse to protect the cable
Do make drip and service
loops
Do tie-wrap all cables to keep
them secure
B
C
D
Description
Wiring the WM-2 Weather Module | 13
Do this
Black
Red
Fuse
Yellow
+ _
12 or 24 V DC