Plw400 - Cisco Linksys PLWK400 User Manual

Linksys PLWK400

PLW400

Wi-Fi Protected Setup button—Press this button to connect with
other wireless network devices that have a Wi-Fi Protected Setup
button
HomePlug Simple Connect button—Configures advanced security
(the network password) for your Powerline network
Reset button (recessed)—To restore the factory default settings
(including the advanced security settings and the network
password), use a pointed object to press and hold the Reset button
for at least ten seconds
Powerline LED—The Powerline LED turns on when the adapter is
connected to the Powerline network The LED flashes to indicate
network activity
Ethernet LED—The Ethernet LED turns on when a wired network
device is turned on and connected to the adapter's Ethernet
(network) port The LED flashes to indicate network activity
Wireless LED—The Wireless LED turns on when a wireless network
device is connected to your PLW400
Wi-Fi Protected Setup™ LED—This LED flashes while a wireless
network device is connecting with your PLW400 using Wi-Fi
Protected Setup
Power LED—The power LED turns on when the adapter is
connected to a powered electrical outlet
Ethernet port—Use a network (Ethernet) cable to connect this port
to a wired network device
Overview
4