Playback; Playback Procedure - Pioneer DVR-RT502 Operating Instructions Manual

Playback

Chapter 5
Playback

Playback procedure

DVD-Video RAM VR mode Video mode
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the DVD mode. (The DVD
indicator will light.)
Note
• It is possible to switch to the VCR mode while DVD
is played back.
1 Press OPEN/CLOSE.
The disc tray will open.
2 Place a disc onto the tray.
Hold the disc, position it with the printed label side up,
align it with the guides, and place it in its proper
position.
3
"READING" appears on the screen and some discs start
playback automatically.
• A menu screen may appear on the TV screen if the
DVD-R CD
4
5
• The DVD/VCR memorizes the stopped point, depending
• If you press STOP again ("
6
The disc tray opens. Remove the disc and press STANDBY/ON.
The disc tray closes automatically and the DVD/VCR turns off.
• If a non-compatible disc is loaded, "INCORRECT DISC",
• Some discs may take a minute or so to start playback.
• A prohibition symbol " " may appear at the upper right of
• When you set a single-faced disc label downwards (ie. the
• Some playback operations of DVDs may be intentionally
• When playing DTS-encoded Audio CDs, excessive noise will
• Playability of 'DualDisc'
Press OPEN/CLOSE to close the disc tray.
disc has a menu feature. In this case, press
, or ENTER to operate a menu feature.
Press PLAY to start playback.
Press STOP to end playback.
on the disc. " " appears on the screen for approx. 4
seconds. " " keeps blinking in the display window until
the playback is stopped completely. Press PLAY to
resume playback (from the scene point).
screen), the DVD/VCR will clear the stopped point.
Then press OPEN/CLOSE.
Note
"REGION CODE ERROR" or "PARENTAL ERROR" will appear
on the TV screen according to the type of loaded disc. In this
case, check your disc again (See pages 9 and 25).
the screen. This symbol means either the feature you tried
is not available on the disc, or the DVD/VCR can not access
the feature at this time. This does not indicate a problem
with the DVD/VCR.
wrong way up) and press PLAY or OPEN/CLOSE, "READ-
ING" will appear and then it will change to "NO DISC".
fixed by software producers. Since this DVD/VCR plays
DVDs according to the disc contents the software producers
designed, some playback features may not be available.
Also refer to the instructions supplied with the DVDs.
be heard from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take
proper precautions when the analog stereo outputs of the
DVD/VCR are connected to an amplification system.
– The DVD-Audio content on DVD side of a DualDisc cannot
be played with this product.
– The DVD-Video content on DVD side of a DualDisc may or
may not be played with this product.
– Since audio content on 'non-DVD' side of a DualDisc is
not compliant with the Compact Disc Digital Audio
specification, it may or may not be played with this product.
– If you need further information about playability of
DualDisc, please see 'Service & Support' on the Pioneer
web site (www.pioneerelectronics.com).
, ,
" appears on the
05
33
En