Porsche Cayman Owner's Manual page 260

Removing the spacers
Please observe the chapter "CHANGING A
WHEEL" on page 255.
1. Unscrew both countersunk screws (M6x16) on
the wheel hub.
2. Remove the spacer.
3. Fasten the brake disc with the short
M6x12 countersunk screws, part No.
900.269.047.09. Tightening torque
10 Nm (7.5 ftlb.).
258
Practical Tips, Emergency Service
4. For wheel mounting without a spacer,
5 mm shorter wheel bolts (part No:
996.361.203.02) must be used. Tighten-
ing torque 130 Nm (96 ftlb.).
Mounting the spacers
Please observe the chapter "CHANGING A
WHEEL" on page 255.
1. Remove wheel
2. Unscrew both countersunk screws (M6x12) on
the break disc.
3. Fasten the spacer with the long M6x16
countersunk screws. Tightening torque
10 Nm (7.5 ftlb.).
4. Fit wheel. To do this use the longer wheel
bolts for fastening the wheels. Tightening
torque 130 Nm (96 ftlb.).
Long wheel bolt, X - bolt length approx. 50 mm,
Arrows - marks
Wheel bolt identifying features
The long wheel bolts are identified on the face
surface of the bolt head with GT or in red, or the
moveable spherical cap ring is galvanised in red.
The long wheel bolts must only be used together
with 5 mm spacers fitted.
The short wheel bolts are not marked in color. The
short wheel bolts must only be used without 5 mm
spacers fitted.
Tightening torque for both wheel bolts:
130 Nm (96 ftlb.).