Dear Customer, Thank you for preferring an Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompany- ing documentation carefully before using your product and keep it for future reference.
Important safety and environmental instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • Dryer can be used by the children at the age of 8 and over and the persons with physical, sensory or mental disorders or unlearned or inexperienced people as long as they are attended by a person who will be responsible for their safety or who will instruct them accordingly about use...
Important safety and environmental instructions • The voltage specified on the type label must be equal to your mains voltage. (See 2.1 Overview) • Unplug the dryer when it is not in use. • Unplug the dryer from the mains during installation, maintenance, cleaning and repair works. • Do not touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
Page 5
Important safety and environmental instructions Below specified laundry or items must not be dried in the dryer due to the fire hazard: • Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads. • Clothing cleaned with industrial chemicals.
Important safety and environmental instructions Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading.
Important safety and environmental instructions Washing machine cannot be placed on the dryer. Pay attention to the above warnings during the installation on your washing machine. Installation Table for Washing Machine and Dryer Washing Machine Depth Dryer Depth 62cm 60 cm 54 cm 50 cm 49 cm 45 cm 40 cm...
Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities. Please visit the following website to get more information on the product. http://www.beko.com Dryer / User Manual 8 / 28 EN...
Page 9
Important safety and environmental instructions 1.7 Technical Specifications Height (min./max.) 84.6 cm / 86. cm* Width 59.5 cm Depth 60.9 cm Laundry drying capacity (max.) 8 kg** Net weight (use of plastic lid) 38 kg Net weight (use of glass lid) 40 kg Voltage Power See type labels*** Main Model Code...
Installation 3.2 Removing the transportation safety Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation assembly and water drain is appropriate referring to the user's Remove the transportation safety manual.(See 3.3 Connecting to the drain and 3.5 assembly before using the dryer for the Electrical connection) If they are not suitable, contact first time.
Installation 3.5 Electrical connection For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety) 3.6 Transportation of the dryer Unplug the dryer before transporting it. Drain all water that has remained in the dryer. If direct water drain connection is made, then remove the hose connections.
Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suit- able for drying in a dryer and make sure that you select the appropriate programme. LAUNDRY DRYING SYMBOLS Drying Suitable for...
Preparation 4.5 Correct load capacity Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table. It is not recommended to load the dryer with laundry exceeding the level indicated in the figure.
Operating the product 5.3 Preparing the machine Additional programs may differ according Plug in your machine. to the features of your machine. Place the laundry in the machine. Press the On/Off/Cancel button for 1 second (long). To obtain better results from your When your machine is operated for the first time, dryer, your laundry must be washed it starts with the declaration programme (wardrobe...
Operating the product It is recommended to use a cloth bag to avoid certain delicate garments and laundry from getting creased or damaged. Take your laundry immediately out of the dryer and hang them after the programme ends in order to prevent them being creased.
Operating the product Dryness level adjustment selection 5.8 Auxiliary functions Dryness level adjustment button is used to adjust Audio Warning the required dryness level. Programme duration can The machine will give an audio warning when the change depending on the selection. programme comes to an end.
Operating the product Anti-creasing Anti-creasing symbol will illuminate at the Anti-creasing programme duration may be end of the programme if Anti-creasing changed with the Anti-creasing selection button. You function is activated. Favourite selection button can use Anti-creasing function to prevent laundry from creasing if you will not take the laundry out after the A programme with the set auxiliary function is saved program has come to an end.
Operating the product Changing the End time If you want to change the time during countdown: Press On/Off/Cancel button for 3 seconds to can- cel the programme. Restart the machine and repeat the Delay Setting procedure for the desired time. Cleaning the condenser When your machine is operated for the first time, Warning symbol flashes with certain intervals to remind...
Operating the product If you select a new programme by turning the Programme Selection knob while your machine is in Pause mode, then the current program is aborted and new programme information is displayed. CAUTION: Do not touch the inner surface of the drum when adding or taking out laundry while a programme is running.
Maintenance and cleaning Service life of product extends and frequently experi- enced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter.
Maintenance and cleaning Do not use metal tools when cleaning metal surfaces of the sensors. Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! • Drain the water in the tank. 6.3 Draining the water tank Dampness of the laundry is removed and condensed dur- ing drying process and the water that arise accumulates...
Maintenance and cleaning 6.4 Cleaning the condenser; Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank. Clean the condenser after every 30 drying cycles or once a month.
Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not load the dryer in excess. Dryer does not switch on or the programme does not start. Dryer is not activated when set. • It might have not been plugged in. Make sure that the machine is plugged in.