Checking/Replacing The Flat Pleated Filter; Checking And Cleaning The Accessories; Storing The Vacuum Cleaner; Technical Specifications - Kärcher A 2701 User Manual

Checking/replacing the flat pleated
filter
(Order no. 6.414-498)
Regularly check the flat pleated filter for damage.
If the flat pleated filter is damaged, replace it
immediately, otherwise the motor may be damaged.
! Switch the unit off and open the cover on the
filter compartment.
2. 2.
1. 1.
! Remove the flat pleated filter and replace with
a new one. Close the cover.
Checking and cleaning the
accessories
! Check the nozzle, suction hose and suction
tube for blockages. They can be cleaned by
rinsing with water. Leave them to dry before
using.

Storing the vacuum cleaner

! Switch the machine off.
! Pull out the mains cable.
Note: Pull out the mains cable by the plug. Never tug
the cable.
If you have been working in wet-vacuuming
mode:
! Empty the dirt container, rinse the inside
if required and leave to dry.
If you have vacuumed up viscous liquids:
! Rinse the accessory.
! Place the suction tubes and accessories in the
accessory bracket.

Technical Specifications

Mains connection
(AUS)
Fuse protection (surge-proof)
Power (suction motor)
P
max
P
nom
Air flow rate
Vacuum
Capacity
Max. water capacity
Length
Width
Height
Weight without accessories
Nominal width, accessory
Sound level
Class of protection
Cable length
220–240 V
240 V
1~50,60 Hz
10 A
1200 Watt
1000 Watt
68 l/s
200 mbar
18 l
12 l
390 mm
290 mm
490 mm
6 kg
Ø 35 mm
72 dB(A)
II
5 m
English 13