Table of Contents
Advertisement
Control panel
You can set the MAC 575 Krypton's DMX address, configure individual fixture settings (personality), read
out data, and execute service utilities from the fixture's control panel. Settings can also be changed
remotely via the DMX link with the Martin MP-2 uploader.
See also the control menu overview starting on page 35 for a complete list of the menus and commands
available in the control panel.
Menu navigation
The DMX address and any status messages (see page 40) are displayed on the control panel when the
MAC 575 Krypton is powered on. To enter the menu, press [Menu]. Press [Up] and [Down] to move within
the menu. To select a function or submenu, press [Enter]. To escape a function or menu, press [Menu].
Note: [Enter] must be pressed and held for a few seconds to enter the Utilities menu.
DMX address and protocol
The DMX address, also known as the start channel, is the first channel used to receive instructions from the
controller. For independent control, each fixture must be assigned its own control channels. Two MAC 575
Kryptons may share the same address, however, if identical behavior is desired. Address sharing can be
useful for diagnostic purposes and symmetric control, particularly when combined with the inverse pan and
tilt options.
Depending on the selected DMX mode, the MAC 575 Krypton requires 19 or 25 DMX channels. The basic
mode uses 19 channels and provides coarse control of all effects plus fine control of gobo rotation, pan, and
tilt. The extended mode uses 25 channels and provides the basic mode features plus fine control of the
dimmer, color wheel, iris, focus, and zoom.
DMX addressing is limited to channels 1 - 494 (in basic mode) and 1 - 488 (in extended mode). This makes
it impossible to set the DMX address so high that you are left without enough control channels for the
fixture.
To set DMX address and protocol
1. Press [Menu] to enter the main menu.
2. Press [Up] until
the desired channel and press [Enter].
3. Select
extended mode. Press [Enter].
Tailoring performance
M o v e m e n t
The MAC 575 Krypton provides several options for optimizing movement for different applications.
• The protocol setting (
Extended mode provides finer position control of the dimmer, color wheel, iris, focus lens, and zoom lens
than the basic mode.
• The pan and tilt invert (
• The pan/tilt speed (
applications.
provides the smoothest movement and is best in long-throw applications with slow movements through
narrow angles.
• The studio mode (
• The shortcuts (
path between two positions, crossing the open position if necessary, or always avoid the open position.
is displayed. Press [Enter]. To snap to channel 1, press [Enter] and [Up]. Scroll to
from the main menu and press [Enter]. Select
) setting selects the basic (
) menu swaps and/or inverts pan and tilt.
) menu provides 3 settings:
provides better performance in applications where speed is most important.
) setting optimizes all effects besides pan and tilt for quietness or speed.
→
) setting determines whether the gobo and color wheels take the shortest
Control panel
for basic mode, or
) or extended (
) control mode.
,
, and
.
for
is best for most
13
Advertisement
Table of Contents
