Advertisement
Available languages
Available languages
Set-Up and Operating Instructions for REX-10™ Barking Dog Alarm (DK10),
Outdoor Motion Sensor (DM10E) and (optional) Key Chain Remote (KR22).
Simple Set-up
Follow these steps to quickly get your Barking Dog system working.
Remove the battery cover on the back of Barking Dog and install 9 "C" cell
alkaline batteries (observe polarity). Replace the battery cover and plug the AC
power cord into any convenient AC outlet near a window or outside door where it
will easily be heard by someone approaching your home.
Note: batteries are for back up only, in case the AC power fails.
To test the system
Make sure the slide switch on the back of Barking Dog is set
to RUN (to the left). Press the "A1-ON" button on the key
chain remote or any other X10 controller. Barking Dog starts
barking. Adjust the volume control on the back to a level that
can be heard from outside your home. If you installed any
(optional) X10 Light Control Modules, five seconds after
barking starts Barking Dog will turn on any X10 Modules
which are set to A1. The barking will stop approximately 30
seconds later, or press the "A1-OFF" button on the remote
to tell Barking Dog to stop barking.
HA wireless remotes such as the KR22 or the optional SH624, or any X10 RF
Wall Switch like SS13 do not need to be installed. The default setting for Barking
Dog is A1 so you activate Barking Dog from these remotes by pressing the 1-ON
button. Pressing the 1-OFF button while Barking Dog is barking tells it to stop.
REX-10 BARKING DOG
USER MANUAL
If you installed any optional X10 light
control modules, you can turn on any
module set to A2 from the 2-ON button on
the key chain remote or other X10
controller. (Modules set to A1 will turn on
when Barking Dog starts barking). To learn
more
accessories or changing any of the default
settings, read on:
Optional Remote Controls
You can use several types of X10 (remote)
controls to activate Barking Dog. These
controllers fall into different categories:
Home Automation (HA) wireless remotes,
HA
plug-in
wireless remotes.
about
installing
controllers,
additional
and
security
Advertisement
