Bluetooth & Infrared Test - Nokia 7280 Service Manual

nokia
C P
ONNECTI NG EOPLE
NMP/CMO Sales and Marketing Customer Ca
Technical Services, Repair Conc
16. BLUETOOTH & INFRARED TEST
Bluetooth test
You need another Bluetooth device (e.g. 6310i) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.
Infrared test
You need another infrared device (e.g. 6310i) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
receiver device.
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Reference unit, Bluetooth /infrared activated
Settings on the test unit:
• Press the red End key to reach the Home Menu
• Select Names and select Search for an entry
If phone and SIM memory is empty, create one new entry.
• Select an entry and select Details
• Select Options
• Select Send business card
A) - for infrared test: Select Via infrared
If sending of business card fails, make sure again that infrared windows are directed to each other and
infrared is activated in reference device. Then try again sending.
Test was successful, if you get this message on receiver device.
You will not get a confirmation on sender device.
B) - for Bluetooth test: Select Via Bluetooth
If needed (for e.g. after a sw-update), enter a name for this device.
• select Options
• select Accept
Search window appears, if all Bluetooth devices in range will be displayed, the test is successful!
• Press red End key to reach Home Menu
Note: If Bluetooth is activated switch it off!
Service Manual 7280 Level 3
re EMEA
epts
PAGE 24 (27)
CONF IDENTIAL
Copyright 2004 © Nokia Corporation
Approved 1.0
24.11.2004
Test unit
DJk