Siemens AX75 Service Manual page 26

AX75 Level 2 Service Manual
Printing IMEI label
The module "Print IMEI label" offers the possibility to re-print IMEI labels for mobiles
again.
You are able to print 1 label in just one step.
To prevent that misaligned labels are being printed, the setting "Print test labels = " is
activated as default. After having printed a well-aligned test label you can uncheck the
setting and print the correct label.
Hint:
For correct printing of IMEI labels you must have a Zebra – label printer with special
material that fits for label printing. This printer has to be connected to local LPT1
printer port (also see Installation of IMPRINT) and MUST feature a printing resolution
of 300dpi.
Copyright © Siemens Pte Ltd.
All Rights Reserved May 2005
COM D CCQ SLI APAC Page 26 of 34 Internal Use Only