FujiFilm Finepix XP30 Series User Manual page 2

I~i Product Features and Precautions for Use
Storage and Maintenance
00
not store at temperatures below
o
°C (3rF) or above 40°C (104 OF).
To ensure continued water reSistance,
it is recommended that you have the
water-resistant seal replaced about
once a year (a
fee
is charged for this
service) Contact your retailer or a
FUJI FILM-authorized repair techni-
cian for more information.
eD
After use, remove water droplets and
foreign matter with a dry cloth, firmly
latch the battery-chamber cover, and
soak the camera in fresh water for
about ten minutes. Dry the camera
thoroughly after removing it from
the water.
• Cold Climates
CD Battery performance drops at low
temperatures, reducing the number
of pictures that can be taken. Insulate
the camera to keep it warm or place
it in your clothing.
(J)
Use anN P-45A battery.
::D
Display response may slow at low
temperatures. This is not a malfunc-
tion.
• After Use
([, Remove any foreigll matter from the
water-resistant seal and adjacent sur-
faces. Foreign matter could damage
the seal, lowering water resistance.
(Ti After using the camera underwater
or in locations where foreign matter
might adhere to the camera body,
rinse the camera under the tap or
leave it in a basill of fresh water for
two to three minutes.
T·
liquid soaps, detergents, alcohol,
and other cleansers may affect water
resistance and should never be used
• During Use
(D
Restrict underwater use to depths of
5 m (16 ft.) or less and periods shorter
than 120 minutes.
:D 00
not open or close the battery-
chamber cover while under water.
eD 00
not use in hot springs or heated
pools.
(I)
00
not dive into water with the cam- •
eD
era or otherwise subject it to exces-
sive force.
(J)
'J)
If the camera is left on the sand, its
temperature may exceed operating
limits and sand may get into the
speaker or microphone
CD Sunscreen, suntan lotion, or other
oily substances may discolor the
camera body and should be re-
moved with a damp cloth.
er
The camera may lose water resis-
tance if su bjected to excessive force
or vibration. Consult your retailer or
a FUJIFILM-authorized repair techni-
cian.
• Before Use
(!:: The front surface of the camera lens
is protected by a sheet of glass. For-
eign matter on the glass will appear
in photographs; keep the glass clean
at all times.
CD Be sure that the battery-chamber
and connector covers are fully
latched. The presence of water, mud,
or sand in the camera could cause
malfunction.
eD 00
not open or close the battery-
chamber or connector cover with
wet hands or near water, for example
while on or by a body of water.
D Be sure the camera is completely dry
before inserting or removing batter-
ies or memory cards or connecting
the USB or AN cable.
r The camera does not float. Be sure to
attach the strap and keep It around
your wrist when using the camera.
• Water, Dust, and Shock Resistance
eD
The camera complies with JIS Class
8 water resistance and JIS Class 6
(IP68) dust resistance standards, and
has passed FUJIFILM drop tests (drop
height: 1.5 m/4.9ft.; impact surface:
plywood, thickness 5 cm/2.0 in.) com-
pliant with MIL-STD 810F Method
516.5: Shock. These results were ob-
tained through in-house testing and
are not a blanket guarantee of water
resistance or invulnerability to dam-
age or destruction. The accessories
supplied with the camera are not
water resistant.
EN-1
ENGLISH