Optional Cleaning Accessories ..9 Trouble Shooting ... . .10-11 In USA Call: 1-800-537-4129 or visit our website: www.karcher-usa.com Specification Engine Operating pressure Water volume Maximum water inlet temperature 6.0 HP Tecumseh...
5-gallon container. • The water supply temperature must not exceed 104°F/40°C. • Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. • Always prevent debris from being drawn into the unit by using a clean water source.
You are now ready to operate your Kärcher Pressure Washer Step 5 Fill gas tank with unleaded gasoline. Do not use leaded gasoline. OPERATING INSTRUCTIONS NOTE: Engines controls shown may appear different.
For high pressure turn wand collar in the plus (+) direction. Step 3 Fill a container with Karcher detergent. Place the filter end of detergent suction tube into the container. For low pressure turn wand collar in the minus (-) direction.
SHUTTING DOWN & CLEAN-UP Step 1 Step 2 Remove detergent suction tube Turn off the from container and insert engine. into one gallon of fresh water. Siphon water at low pressure for one minute. Step 5 Step 6 Disconnect Disconnect the high pressure hose from the the garden hose from the high pressure outlet and engage the gun safety lock.
Recommendations non-sensitive metal surfaces, you may • Before cleaning any surface an inconspic- want to use the Karcher Rotating Nozzle uous area should be cleaned to test spray Spray Wand. pattern and distance for maximum clean- Caution: Do not use rotating nozzle spray ing results.
Page 7
Pump is noisy. Water leaks from pump (up to 10 drops per minute is permissible). Oil Drip. 1-800-537-4129 or visit our website: www.karcher-usa.com - continued Cause Detergent suction tube not properly connected to the machine. Detergent is too thick. Filter on detergent suction tube is clogged.