5. Configure the Access Point
Note: The Access Point can be configured using the Utility or a Web Browser.
For non-Windows users change your computer's IP address to 192.168.10.x
(where x is an available address from 1-254). Since the Access Point's default
IP address is 192.168.10.100, make sure no other network devices are
assigned an IP address of 192.168.10.100.
Windows users
1. Insert the Utility CD-ROM into your
computer's CD-ROM drive. Then
click Install Utility.
2. Follow the InstallShield Wizard
instructions and then click Finish.
3. Double click the Utility icon on
your desktop.
10
English