Advertisement
Quick Links
1. Description
This installation guide provides detailed information and instructions for the HNR-E10450 network DVR
products. The NVR4 offers the remote live and playback function as a recording server.
•
Front View
•
Right Side View
Sata hard disc drive
N V R 1
Power On/Standby button
Power On/Standby button
Power LED : See ** below
REC LED : Emitting during recording
Network LED : Emitting when Ethernet cable connected
Network LED : Emitting when Ethernet cable connected
** Power status
Red : Standby state
Orange : In booting progress
Green : Normal state
Extra Sata connector : To expand hard disc drive
adding to installed drive inside
Q u i c k I n s t a l l a t i o n G u i d e
Advertisement
Summary of Contents for Hitron HNR-E10450
- Page 1 Q u i c k I n s t a l l a t i o n G u i d e 1. Description This installation guide provides detailed information and instructions for the HNR-E10450 network DVR products. The NVR4 offers the remote live and playback function as a recording server.
- Page 2 • Left Side View 2 USB Port : To connect external hard disk drives for data backup or USB memory stick for clip copy • Rear View WiFi Antennas - 2.4GHz and 5GHz wireless antennas ** Only available for HNR-E20450 8 Ports Sensor Input - NC/NO Devices selectable - TTL Level Input...
-
Page 3: Installation
2. Installation 2.1 Connecting Power and Network • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-over cable is used for directly connection to PC, while a direct cable is used for connection to a hub. The following picture is an example of a network diagram using NVR4. - Page 4 • Connecting RS232 An RS232 port is provided to connect a text-in device like a POS. Use a RS232 cable with a DB-9S (female) connector to connect to the NVR. • Connecting USB The NVR supports two USB interface for connecting external storage devices; They are located on the left side of body.
- Page 5 • Factory Reset The NVR has a Factory Reset button on the rear panel. This button will only be used on the rare occasions that you want to return all the settings to the original factory settings. To reset the unit, you will need to follow steps: 1.
- Page 6 2. Multi-location Configuration. Case 1 Local Site 1 Internet Client PC Local Site 2 Internet Case 2 Internet Client PC Internet...
-
Page 7: Network Connection And Ip Assignment
2.2 Network Connection and IP assignment The Network Video Recorder supports the operation through the network. When the NVR is first connected to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager”... -
Page 8: Connecting To The Website
2.3 Connecting to the Website The Network Video Recorder supports the operation through the network. When the NVR is first connected to the network, it has no IP address. So, it is necessary to allocate an IP address to the device with the “Smart Manager”... - Page 9 [Step2] Easy Installation makes the NVR detect ONVIF based all of network cameras and register automatically. Change the admin password or use the default password (admin) of cameras to be detected. If you don’t want to use Easy Install function, inactivate checkbox. In case that you activated Easy Installation, you don’t need to do Step3.
- Page 10 [Step3] The NVR detects all of IP cameras connected in the intranet and displays in the camera list. Click the Search Cameras button and the Camera Discovery window appears. Select one of three in Search Mode and click the Start Search button. Note: The NVR4 supports only for cameras which use the ONVIF Conformance protocol.
- Page 11 All cameras detected are displayed in the list. Display the name and IP address the selected camera. The name will be updated automatically depending on the settings of the network camera. Select one or several cameras from the list and click the Register button to register. The Login window appears and inquires ID and Password.
- Page 12 The NVR displays the registered camera list in the Camera Registration window. When you select a camera channel in the list, the basic information for that camera is displayed in Camera Information section. Configure camera settings you want to change. Click the Save button to save settings changed.
- Page 13 If you want to configure more detail information for a selected camera, click the Onvif Setup button in the Setup Wizard window. You can configure camera settings about Profile, Video, Audio, and Network. [Step4] The list of available hard disk drives is displayed with the information of the hard disk drives. Select a hard disk drive from the list and click the Format button.
- Page 14 When you click the Format button, the NVR ask you to set the storage to record or archive device. If the storage is formatted to archiving device, it can be used as a record storage. Note: Archive records a video to the record storage and copies it to the archive storage at the same time.