Pirelli Discus DP-L10 User Manual page 80

8 Chapter
Register port
Register period
Outbound server
Outbound port
RTP audio port
RTP pkt.period
Preferred codec
1. From the idle mode, press
(WLAN) >
OK key
2. Enter Username, Password, and all the information provided by your
service provider.
When all the settings are correct, and the DP-L10 successfully registers to the
network, the bold VoIP indication will remain displayed.
80
VoIPon www.voipon.co.uk
SIP register port
number.
The IP address of
the outbound proxy
server
The port number of
the outbound proxy
server
.
The Real-Time
Transport Protocol
port base configured
for the IP phone
Voice codec:
G.711U
G.711A
G.726-32
G.726-16
G.729 (this codec may
be available in
alternative to G.726;
please check with your
service provider).
OK key
OK key > Scroll down
sales@voipon.co.uk
Default: 5060
Default: 3600
You can use either a
dotted IP address or
a DNS name
The default is 5060.
Default: 9000
.
Default:20
(Menu) > Scroll down
(four times)
Tel: +44 (0)1245 808195
(SIP settings) >
Fax: +44 (0)1245 600030