Option Menu - Kogan kaled55 series User Manual

5.OPTION MENU

To enter the Option Menu, press MENU button and then press
Once in Option Menu, press
to return to the Main Menu.
Note:
1) The OSD Language option allows you to select the language used in the various TV menus from a wide
selection. At the initial setup stage of the TV, the default language is English, and it is recommended that this
setting is not changed unless you are fluent in any new language chosen.
2) The Audio Languages and Subtitle Languages options relate to DTV reception only. Some TV channels
transmit their audio and subtitles in more than one language, and if this is known in advance, you can select
this alternative language. At the initial setup stage, the default language is English, and it is recommended
that this setting is not changed unless you are fluent in any new language chosen.
3) HDMI CEC (Consumer Electronics Control) allows your TV to share control of some functions with various
compatible equipment via an HDMI cable connection. The HDMI cable connecting your equipment to this TV
must support both ARC and CEC functionality.
For example, with HDMI CEC set to "On" in the TV's menu and also on an HDMI connected device that
supports CEC (eg. a Blu-ray player), selecting the HDMI input on this TV sends a signal to the Blu-ray player
and may switch it On from its Standby state (depending on the player's CEC capabilities).
If the HDMI CEC and Auto Standby in the HDMI CEC menu are both set to "On" in the TV's Option menu, and
the connected equipment supports the Standby function, then switching On the HDMI connected player may
also switch On the TV from its Standby state. This activity may even set the TV to the HDMI input that the
external device is connected to (again, these examples depend on the capabilities of your connected
equipment).
The HDMI CEC system supports a wide variety of commands, many of which may not be applicable to this TV
or any connected HDMI equipment. Refer to the User Manual of your other equipment to check what areas of
the CEC commands they may be able to work with. If after selecting CEC operation you find the TV or any
connected equipment performing unusually (eg. switching itself back on after you're switched it back to the
Standby mode), your connected equipment may not be compatible with this TV, and the HDMI CEC sub-menu
should be set to the Off position.
NB. The HDMI ARC (Audio Return Channel) function is also only available on the HDMI 1 input. If this
function is not required, set the HDMI ARC sub-menu option to the Off position.
PVR File System
In the PVR File System sub-menu you will be asked to format your USB 2.0 flash drive or Hard Disc for PVR
Operation. If you are not familiar with the various drive or partition options for storage devices, start this
process using a blank (ie. unused storage device), or one which does not hold sensitive or required data.
Select Disc
To view and select the USB drive or Hard Disc that you would like to record to, press the OK button to enter
the Select Disk sub-menu and then press
storage device type that is connected to the TV. Press the OK button to return to the PVR File System sub-
menu.
or buttons to select the settings you wish to adjust. Press MENU button
OSD Language English
Audio Languages
Subtitle Languages
Hearing Impaired
PVR File System
<
OPTION
Restore Factory Default
HDMI CEC
Select Disk
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
or
HDMI CEC
Device list
HDMI CEC Off
HDMI ARC Off
>
Auto Standby On
C:
or buttons on your remote control to select the particular
-20-
MENU SETTINGS
buttons to select the Option Menu.
MENU