Installation 11 - Omega Engineering LDP-124 User Manual

11.- INSTALLATION
1.- Prepare a panel cut-out with the dimensions indicated on paragraph 12.
2.- Slide the instrument (1) into the cut-out.
3.- Slide the two fixation pieces (3) with T shape by both lateral sides of the instrument, such as it
is shown on the drawing below.
4.- Turn the screw bolt until it is pressed firmly against the panel (4) and the instrument (1) remains
totally fixed.
5.- The front part of the instrument has the necessary elements to provide an IP 65 protection. If the
panel where this instrument must be installed, it must to comply some protection standards
against water splashes, then a rubber profile must be installed with a rectangular or round shape
(5) on the place indicated and shown on the drawing below.
5
12.- MECHANICAL DIMENSIONS mm (inches)
PANEL CUT-OUT
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
D
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
Panel thickness : Max. 14 (0.55)
Digits Height
4 57 (2.3)
4 100 (4)
6 57 (2.3)
6 100 (4)
4
3
E
Min. 2.5 (0.10)
DIMENSIONS
A B
264 (10.4) 120 (4.75)
480 (18.9) 180 (7.09)
384 (15.12) 120 (4.75)
688 (27.1) 180 (7.09)
Dimensions in mm. Parenthesis are in inches or pounds.
Add 27 mm (1.1) to the dimension C for power connector.
2
C
B
A
Anti-Glare red lens
PANEL CUT-OUT
C
112 (4.41) 256 (10.07)
112 (4.41) 472 (18.58)
112 (4.41) 376 (14.8)
112 (4.41) 680 (26.77)
Aluminium back plate
WEIGHT
D E
112 (4.4) 2.3 Kg (5 lbs)
172 (6.77) 5 Kg (11 lbs)
112 (4.4) 2.7 Kg (6 lbs)
172 (6.77) 5.7 Kg (12.5 lbs)
1
POWER
6 Va
12 VA
6 VA
12 VA
Page : 20