Chapter 4 Software & Applications; Introduction; Installing Support Software - ECS P49G Series User Manual

Chapter 4 Software & Applications

Introduction

This chapter describes the contents of the support DVD-ROM/CD-ROM that
comes with the motherboard package.
The support DVD-ROM/CD-ROM contains all useful software, necessary drivers
and utility programs to properly run our products. More program information is
available in a README file, located in the same directory as the software.
To run the support disk, simply insert the disk into your DVD-ROM/CD-ROM
drive. An Auto Setup screen automatically pops out, and then you can go on the
auto-installing or manual installation depending on your operating system.
If your operating system is Windows XP/Vista/7, it will automatically install all the
drivers and utilities for your motherboard.

Installing Support Software

1 Insert the support DVD-ROM/CD-ROM disc in the DVD-ROM/CD-
ROM drive.
2 When you insert the DVD-ROM/CD-ROM disc in the system DVD-
ROM/CD-ROM drive, the disk automatically displays an Auto Setup
screen.
3 The screen displays three buttons of Setup, Browse CD and Exit on
the right side, and three others Drivers, Utilities and Information at
the top. Please see the following illustration.
The Setup button runs the software auto-installing program as explained in next
section.
Chapter 4: Software & Applications
37