Step 8. If the flashing F/W has been completed, "Ok" message will be showed on the
right TextBox.
Step 9. Unplug and replug power cord of VA503/VA703/VA903 set and then check the
OSD operation and image on srceen.
Step 10. At last, do "Memory Recall."
3.2 Setup Procedure
3.2.1 Connect P2 and monitor of Fixture with VGA ports of VA503/VA703/VA903 by
VGA Cable.
3.2.2 Connect P1 of Fixture with
3.2.3 Plug Power Adapter to Fixture.
3.2.4 Connect Power Cord to VA503/VA703/VA903 Monitor.
3.2.5 Connect PC to the additional monitor.
P1 to LTP Cable
ViewSonic Corporation
Printer port
of PC by LPT Cable.
- 35 –
Confidential - Do Not Cop
JP1
Power Adapter
P2
VGA Cable
VA703b/VA703m