Operation; Control Panel Operation; Changing Options Within The Same Function; Changing Options For A Different Function - Chauvet Scorpion 320D EU User Manual

4. O
PERATION
Control Panel

Operation

Changing
Options Within
the Same
Function
Changing
Options for a
Different
Function

Menu Map

Mode or
Starting Value
Standalone
Sound-Active
DMX
SLA
S = ˧
rEn
Configuration
(DMX)

Starting Address

Page 16 of 60
This product is not designed for continual use. Make sure there are

regular breaks during operation to maximize the life of your laser.
Always disconnect the Scorpion™ 320D EU from power when not in use.

To access the control panel functions, use the four buttons located underneath the
display. When the product is on, the display on the rear panel will show the current
operating mode (standalone or DMX). The product will retain the last saved settings when
powered off.
Button
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
To change an option, do the following:
1. Press <MENU> once (the LED display will blink).
2. Press <UP> or <DOWN> until the desired menu option shows on the LED display.
3. Press <ENT> to accept the new option (the new option will show solid on the LED
display).
To change an option for a different function:
1. Press <MENU> once (the LED display will blink).
2. Press <MENU> repeatedly until seeing the active option of the desired menu branch.
3. Press <UP> or <DOWN> until the desired menu option within the new menu branch
shows on the LED display.
4. Press <ENT> to accept the new option (the new option will show solid on the LED
display).
Program or
Options
Channel Range
Aut
Aut N/A
Sensitivity
Sou S 0~S 9
000~495
N/A
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
on the Scorpion™ 320D EU.
When selecting a DMX starting address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Scorpion™ 320D EU uses up to 18 DMX channels in its DMX mode, which defines
the highest configurable address to 495. If you are not familiar with DMX, download the
DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until a three-digit value appears on the display.
2. Use <UP> or <DOWN> to select the starting address.
3. Press <ENTER>.
Function
Description
Pre-programmed effects that cannot be customized
Automatic (Random)
The product responds to the beat of the music
0 = least sensitive, 9 = most sensitive
DMX mode, sets starting address
For Master/Slave operation
Image orientation
Remote control operation
Scorpion™ 320D EU User Manual (Rev. 2 ML)