Table of Contents
Advertisement
GB
3.1 Step 1
The radio has to be mounted permanently (e.g. in a wall). It is suitable for vertical or horizontal installation because
of the rotatable display unit. Two in-wall installation electrical outlets are needed with 60 mm Ø.
• Install in-wall installation electrical outlets at the suitable location vertically
or horizontally.
• Insert base with loudspeaker into the electrical outlet and screw tight.
Assembly and installation
Notes:
– The safety instructions (page 4)
must be observed at installation.
– Before installation, check whether
there is a good radio reception
at the installation site!
9
Advertisement
Table of Contents
