Summary of Contents for Black Box 4-Port BNC Repeater
Page 1
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
Page 3
Important: Black Box’ 4-Port BNC Repeaters contain no user serviceable parts. Attempted service by unauthorized personnel shall render any and all warranties null and void. If problems are experienced with a Black Box 4-Port BNC Repeater, consult Section 5, Troubleshooting, of this User Guide.
Page 4
BLACK BOX 4-Port BNC Repeater Installation and User Guide FEDERAL COMMUNICATIONS COMMISSION CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
Page 5
BLACK BOX 4-Port BNC Repeater Installation and User Guide Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
Page 6
BLACK BOX 4-Port BNC Repeater Installation and User Guide 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del...
- 50 m (164 ft) Connectors (or ports) for 10Mb Ethernet media 4-Port BNC Repeater : For Ethernet media attachment, there are 4 BNC connectors (no BNC terminators or taps are included) and one AUI (DB15 female with slide lock) connector.
BLACK BOX 4-Port BNC Repeater Installation and User Guide LED Indicators on Chassis PWR - Power, Green LED, steady ON indicates there is AC power applied to the unit. JAM - Jam, Amber LED, illuminates when jam or jabber condition (illegal packet size) is detected on any port;...
AUI drop-cable or another media (such as RJ-45 twisted pair of Fiber) via an appropriate mini-transceiver attached to the AUI port. Each 4-Port BNC Repeater unit is a complete operational unit with internal auto- ranging (for world-wide use) power supply. It is enclosed in a compact, rugged metal enclosure.
2.2.1 4-Port BNC Repeater Chassis The 4-Port BNC Repeater functions as a BNC “hub” repeater. Its chassis houses the main repeater circuit board, the port connectors and status LEDs, and the power supply. The BNC ports are used for attaching one Ethernet BNC (or ThinNet) segment each, and provide full IEEE 802.3 repeater functionality supporting a full length segment.
Manual Partition switch on each BNC port The 4-Port BNC Repeater features a pushbutton switch on each BNC port that enables that port to be isolated. This simplifies installation and repairs. When a port is manually partitioned, devices and connections attached to it may be tested or serviced without the risk of interfering with the operation of the other ports.
AUI port for different media and backbone connections. The internal auto-ranging power supply of the 4-Port BNC Repeater permits it to be installed anywhere in the world. In the workplace or in a wiring closet, the 4-Port BNC Repeater unit may be conveniently shelf or table-top mounted and plugged into a standard AC power convenience outlet for a simple installation.
It is typically shelf-mounted, either in a wiring closet or in an open area. To conserve shelf space, it may be desirable to mount several units on top of each other. If so, this may be readily done as the 4-Port BNC Repeater steel case is strong. Connecting Ethernet Media The 4-Port BNC Repeater is specifically designed to support connections for up to four BNC segments.
Using the illustration below as a guide, attach a mini-transceiver to the AUI port. This will enable the AUI port to be converted to another media (such as twisted pair RJ-45, or fiber, or a fifth BNC port). The 4-port BNC Repeater will supply power to the mini- transceiver per Ethernet specifications.
This section describes the functionality and operation of the 4-Port BNC Repeater. Repeater Functionality The 4-Port BNC Repeater operates as a “BNC hub”. It is compliant with IEEE 802.3 specifications and supports all applicable IEEE media. The following describes the basic functionality of the 4-Port BNC Repeaters.
AC power-related problems or damage to the unit. 4.3 LEDs The 4-Port BNC Repeater is equipped with three common LEDs located on the front of the chassis unit. These LEDs indicate Power (PWR), Jam (JAM), and Activity (ACT).
It contains no user-serviceable parts. Contact Black Box. Before you do, make a record of the history of the problem. Black Box will be able to provide more efficient and accurate assistance with a complete description, including: •...
Page 20
BLACK BOX 4-Port BNC Repeater Installation and User Guide...