Tape Dubbing; When Playing Back On Sr-W5U And Recording On Another Unit - JVC SR-W5U Instructions Manual

7 TAPE DUBBING

When Playing Back on SR-W5U and Recording on Another Unit

AC AC
OUTPUT INTPUT
( MAX ) 120V
100W 60Hz
LINE 1
LINE 3
LINE 2
R L VIDEO S R
INPUT
AUDIO IN HD VIDEO IN
R L Y P
B
HD/S3(W-VHS) HD(CAM/W-VHS)
PHONES VOLUME
MIN
REMOTE
PAUSE
VIDEO L– AUDIO –R
Another unit (as a recording machine)
1 Set the recording machine to external input.
2 Put the recording to a pause.
SR-W5U (as a playback machine)
3 Start playback shortly before the section where you
want to PLAY.
• When noise appears during playback with W-VHS
tape, set the NR switch to "ON".
Another unit (as a recording machine)
4 Start recording at a section of the program you
want to dub.
5 To finish, press the STOP button. Extra recording
can be avoided by stopping the recording machine
then the SR-W5U.
24
Audio output
LINE 1
LINE 2
R.A. EDIT
L VIDEO S
PRE ROLL
OUTPUT
REMOTE
AUDIO OUT3 HD VIDEO OUT1 HD VIDEO OUT2
P R L Y P P
R B R
(HDTV/W-VHS) HD(HDTV/W-VHS) RGB(DISPLAY)
REC LEVEL IR REMOTE
MANUAL OFF
AUTO ON
MAX
EDIT(HD REC)
NR(W-VHS PLAY)
ON
INPUT
LINE4 OFF
Y/C TIMING
R
C
L
NR
To video input connector
S Video (Video) output
(To HD video/audio input)
SR-W5U (as a playback machine)
6 Press the STOP button.
7 If the NR switch was set to "ON" in step 3, set it
back to "OFF".
When dubbing a high vision video, use the HD
video cable, provided that the recording VCR is
equipped with the HD video input and HD audio
input connectors.
To audio input
connector
TRACKING AUTO