Table of Contents
Advertisement
Variable Speed Search
During playback, turn the JOG dial to the right for
forward variable-speed search, or to the left for reverse
variable-speed search.
OR
During playback, press
w
The more times you press, the faster the playback picture
moves.
To decrease speed, press the button for the opposite direction.
NOTES:
For speed search, refer to the table below.
You can see smooth slow motion picture only during 1/2x
slow motion playback.
You can hear the normal audio track only during 1.5x speed
search.
Reverse
Reverse
Reverse
Reverse
slow
search
play
motion
–1
–7, –5, –3
–1/6, –1/18 1/18, 1/6, 1/2*
To resume normal playback, press
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
Press
or
(
or
w
e
2
6
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
Current position
When the specified index code is located, playback begins
automatically.
or
.
e
Forward
Slow
Normal
Forward
motion
play
1
1.5*,2, 3, 5, 7
* PAL SP/LP only
.
4
). "
1" or "
1" is
2
6
or
repeatedly
w
e
Index number
Skip Search
During playback, press 30 SEC 1 to 4 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
To resume normal playback during a Skip Search,
press
.
4
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
search
Timer mode is disengaged.
Activate Instant ReView.
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
the Instant REVIEW indicator (
the first of the 3 programmes, press REVIEW three times. The
recorder searches and begins playback automatically. You can
access a programme as far as 9 index codes away from the
current tape position.
The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (
Mode Lock
— To prohibit any operations during
playback
Press and hold OK on the remote control for more than
5 seconds. "
panel. No buttons will function and playback will not be
interrupted until the recording end (unrecorded portion)
w
or tape end is reached (
e
To cancel Mode Lock, press and hold OK again for more
than 5 seconds.
When OK is pressed to set Mode Lock, the on-screen display
appears and the time counter remains on the TV screen. If the
time counter is not necessary, set "O.S.D. (PLAY)" and "O.S.D.
(REC)" to "OFF" (
NOTE:
It is also possible to use Mode lock during Repeat Playback
(
pg. 18) and Series Playback (
) and "3" blink. To watch
pg. 35).
" and "
" light up on the front display
pg. 48).
pg. 45, 46).
pg. 24).
17
EN
Advertisement
Table of Contents
