Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Greenlee HW1V
Summary of Contents for Greenlee HW1V
- Page 1 SERVICE MANUAL HW1V Impact Wrench Serial Code BBB Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 52061484 REV 3 © 2013 Greenlee Textron Inc. 3/13...
-
Page 2: Table Of Contents
SAE Standard J1273 (Hose and Hose Assemblies): Publication 99930323 All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Super Spool is a trademark of Greenlee Textron Inc. -
Page 3: Important Safety Information
Refer also to the Operation Manual listed under “Other Publications.” Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 4 Note: Keep all decals clean and legible, and replace can result in serious injury. when necessary. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 5: Disassembly
Complete disassembly of the tool is not recommended. If a complete overhaul is necessary, return the tool to 1. Slide the thrust ring (61) back to expose thrust ring your nearest Greenlee Utility Authorized Service Center. lock (60). Remove thrust ring lock, thrust ring, and spring (62). -
Page 6: Inspection
Pull knob (67) to remove bypass spool (66). 2. Remove O-ring (64) from bypass spool (66). If nec- essary, remove set screw (68) to separate knob (67) and spool (66). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 7: Assembly
Secure the gear with the retaining ring (11). Install second pin (46) through trigger (37) and trigger spool (29). Secure pins with retaining rings (47). Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 8 Insert spring (62) and thrust ring (61) into retaining sleeve. Slide the thrust ring back and install thrust ring lock (60) onto the anvil. Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 9: Illustrations And Parts List
HW1V Impact Wrench Illustration—Main Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 10 HW1V Impact Wrench Illustration—Impact Mechanism Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 11: Parts List
Cap, hammer case assembly 00407 52061530 Bypass spool assembly (includes item 42) ........1 (includes items 66–68) Bearing ..........1 O-ring, 2.125 x 2.250 x .062-70 ....1 Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 12: Accessories
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 An ISO 9001 Company • Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 Greenlee Textron Inc. is a subsidiary of Textron Inc. www.greenlee.com...