Removing The Computer Cover - Dell OptiPlex 745c User Manual
Hide thumbs
Also See for OptiPlex 745c:
- Quick reference manual (36 pages) ,
- Administrator's manual (20 pages) ,
- Quick reference manual (224 pages)
Table of Contents
Advertisement
Back to Contents Page
Dell™ OptiPlex™ 745c User's Guide
Removing the Computer Cover
Removing the Computer Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
1. Follow the procedures in
Before You
2. Lay the computer on its side as shown in the illustration.
3. Locate the cover release latch shown in the illustration. Then, slide the release latch back as you lift the cover.
4. Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.
5. Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
CAUTION:
Graphic card heatsinks can become very hot during normal operation. Ensure that a graphic card heatsink has had sufficient time to
cool before you touch it.
1
security cable slot
Back to Contents Page
Begin.
2
cover release latch
3
padlock ring
Advertisement
Table of Contents
Troubleshooting
