Tape Position Indicator; Next-Function Memory; Av Compu Link Playback - JVC HR-VP638U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-VP638U:
Table of Contents

Advertisement

1
2
4
5
7
8
0
REW
C.MEMORY

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the SHUTTLE ring, or perform
an Index Search or Instant ReView.
The position of "
"B" (Beginning) or "E" (End) shows
6
you where you are on the tape.
q
NOTE:
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (

Next-Function Memory

The Next Function Memory "tells" the VCR what to do after
rewinding. * Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
POWER
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
3
NOTES:
6
9
TIMER
FF

AV COMPU LINK Playback

Your VCR is compatible with JVC's AV COMPU LINK components,
including amplifiers (or receivers) and televisions. AV COMPU
LINK provides one touch control of the audio and video compo-
nents that are linked via their AV COMPU LINK connectors.
For example: simply load a cassette in the VCR and press PLAY
and the AV COMPU LINK components automatically power on,
the TV's VIDEO mode is selected and the VCR goes into play
mode. (PLAY need not be pressed if the cassette's record safety
tab is removed.)
1
2
3
" in relation to
pg. 28).
To do the above using the VCR's controls:
During Stop, turn the SHUTTLE all the way to the left and
release it instead of pressing REW, and then press PLAY or
POWER within 2 seconds.
If you want the "next function" to automatically start when the
counter reads "0H 00M 00S" (instead of at the beginning of the
tape), press C. MEMORY so that the counter memory indicator
appears on the front display panel before pressing REW.
MAKE CONNECTION
Connect your VCR to an AV COMPU LINK component
as shown in the illustration on page 32.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
TURN ON THE VCR
Press POWER.
ACCESS MAIN MENU
SCREEN
Press MENU as many times as necessary.
CONTINUED ON NEXT PAGE.
31
+
+
+
B
E
COUNT
0:33:27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-vp638u(c)

Table of Contents