Playback - JVC HR-VP450U Instructions Manual

1 2 3
2
4 5 6
7 8 9
0
4
1

Playback

The VCR assesses the quality of the tape once you start playback.
Perform steps 1 and 2 on page 16 ("Simple Playback") before
continuing.
START PLAYBACK
1
Press PLAY.
The VCR adjusts the
playback picture quality
based on the quality of
the tape in use.
NOTES:
When using rental tapes,
or tapes recorded on other VCRs, set "AUTO
PICTURE" in step 4 of the Preparation procedure to
either "ON" or "OFF" as desired to give the best
picture ( pg. 26).
The Auto Picture screen only appears at the begin-
ning of automatic tracking. Even though the screen
doesn't appear after that, the Auto Picture function is
operative.
To display the Auto Picture screen, "SUPERIMPOSE"
must be set to "ON" or the Auto Picture screen will
not appear ( pg. 23).
27
EN
AUTO PICTURE