Callback Request - Panasonic DBS 576 Technical Manual

Chapter 6. DSLT Features
Considerations
• You cannot break in on three-party conference calls.
• The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.

Callback Request

Description
If you dial a busy extension, Callback Request enables the System to call you back when that
extension becomes free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Callback Request code (default = 3).
4. Replace the handset after you hear the ringback tone.
To respond to the callback request:
1. Lift the handset.
To cancel a Callback Request:
1. Lift the handset.
2. Enter the Callback cancellation code (default = 769).
3. Replace the handset .
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Callback Request Send)
6-12
Action
Action
Action
DBS 576 (USA) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Busy tone
Ringback tone
System calls back when called extension
becomes free
Result
System automatically redials extension
Result
Intercom dial tone
576-51-700