Side Zipper - Brother computerized sewing and embroidery machine Operation Manual

■ Side Zipper

Use for side zippers on skirts or dresses.
a
Press
* Be sure to select the straight stitch with the middle
needle position.
LSN
b
Attach presser foot "J", sew straight stitches
to the zipper opening, and then sew basting
stitches to the edge of the fabric.
a Basting
b End of zipper opening
c Reverse stitching
d Wrong side of fabric
c
Press the seam allowance open and align the
folded hem along the teeth of the zipper,
while maintaining 3 mm (approx.
1/8 inch) of sewing space.
a Zipper pull tab
b Zipper teeth
c End of zipper opening
d 3 mm (approx. 1/8 inch)
e Wrong side of fabric
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
.
a
b
d
c
a
b
e
c
d
Tel: 03-91025766/ 5767
d
Remove presser foot "J", and then attach the
presser foot holder to the pin on the right side
of zipper foot "I".
a
b
a Right side
b Left side
c Needle drop point
• When using zipper foot "I", make sure the straight
stitch, middle needle position is selected. Turn the
handwheel to make sure the needle does not strike
the presser foot. If another stitch is selected, the
needle will strike the presser foot, causing the needle
to break and possibly causing injury.
e
Set the presser foot in the 3 mm (approx.
1/8 inch) margin.
f
Starting from the end of the zipper opening,
sew to a point about 50 mm (approx.
2 inches) from the edge of the fabric, then
stop the machine.
g
Pull down the zipper slider, then continue
sewing to the edge of the fabric.
b
a 3 mm (approx. 1/8 inch)
b 50 mm (approx. 2 inch)
• Make sure the needle does not strike the zipper
during sewing. If the needle strikes the zipper, the
needle may break, leading to injury.
Fax: 03-91025768 H/P: 012-6552245
SEWING THE STITCHES
c
CAUTION
a
CAUTION
3
85