S-Video Connection - JVC HR-S8500E/EH Instructions Manual

S-VIDEO Connection

Back of TV
Back of Recorder
To Connect to A TV With S-VIDEO/AUDIO IN Connectors . . .
CONNECT RECORDER TO
TV
1
a– Connect the aerial, recorder and TV as per "RF
CONNECTION" (
b– Connect the recorder's S VIDEO OUT connector to
the TV's S-VIDEO IN connector.
c– Connect the recorder's AUDIO OUT connectors to
the TV's AUDIO IN connectors.
CONNECT RECORDER TO
MAINS
2
Plug the end of the mains power cord into a mains
outlet.
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the recorder's
front display panel when the
page 6 to perform Auto Set Up.
Aerial terminal
S-VIDEO IN
connector
AUDIO IN
connectors
Mains outlet
Mains Power Cord
pg. 4).
button on the recorder/remote control is pressed for the first time to power on the recorder; go to
S-Video cable (not provided)
Audio cable (not provided)
S VIDEO OUT
AUDIO OUT
AV1 OUT
IN OUT AV1 IN/OUT
COMP. Y/C
S VIDEO
AV2 IN/DECODER
RF Cable (provided)
NOTES:
You can obtain high-quality S-VHS pictures.
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
For switching the TV's mode, refer to the instruction manual
of your television.
Aerial or Cable
ANT. IN
ANT. IN
R L
AUDIO OUT
RF OUT
PAUSE/
R.A. EDIT
RF OUT
pg. 48)
5
EN