Today's PCs are like supercomputers. And most PC users only use a small fraction as low as 5% of the power of their machines. NComputer takes the excess capacity and allows up to 30 users to each enjoy their own rich PC experience. They feel like they have their own PC, but at a fraction of the cost and without all of the maintenance headaches.
Personal Access Terminal / PAT490 User Manual PAT490 Specifications: Resource PAT490/PAT490L Stand-alone operating system WIN CE 6.0 OS Maximum Users Each Terminal For One Users ARM11 800HZ 128MB STORAGE 128MB Audio output Have Audio input Have (except remote desktop connection)
Personal Access Terminal / PAT490 User Manual Wireless Specification: Features CMOS Technology with RF, Baseband, and MAC integrated. 1T1R Mode with 150Mbps PHY Rate for Both Transmit and Receiving. 802.11n Standard Legacy and High Throughput Modes 20 MHZ Bandwidth. Reverse Direction Grant Data Flow and Frame Aggregation.
Personal Access Terminal / PAT490 User Manual Terminal Configuration: 1. Device Setup: connecting with the server , 2. Device and Time setup ①Setting a regular time---Set time manually,select your region in control panel. ②Sync time with server---input IP address of the server ( keep networking) ③Sync Internet---Select one number(3 number is recommended,it depends on your country)
Personal Access Terminal / PAT490 User Manual 4.Network setting 1)Assign IP addresses automatically if DHCP 2)Enter IP address manually if STATIC 5. Update setting Here you can change boot image and upgrade system manually The password for changing boot image.Password for changing logo: thinclientadmin...
Personal Access Terminal / PAT490 User Manual 7.Connect To PC: Pls choose desktop mode, to enter into local desktop. Here it is available for RDP connection. Click this option...
Page 8
Personal Access Terminal / PAT490 User Manual 8.Connecting with the server Enter into IP address Enter into user name and password that you creates in the server...
Page 9
Personal Access Terminal / PAT490 User Manual Click Yes,pls tick it if you do not want to see the notice next time. Now RDP connects. If you fail to connect with the server. Pls check if. 1,The network is connected.