Key index
Network key / Confirm
network key
EAP TYPE / Tunnel /
Provision Mode
Username / Identity /
Domain / Password
Certificate
PAC
When all required parameters are set, click "OK" to create and save a new profile.
3.1.2 Remove an existing profile
If you want to remove a profile no longer needed, click "Profile" label, then select the existing
profile you wish to remove, and click "Remove" button.
The passphrase must be identical with the setting of wireless
access point you with to connect.
Select WEP key index. For most of access points you can
select "1", but please refer to the setting of the access point.
When the encryption type is "WPA" or "WPA2-PSK", it's
required to input a set of "passphrase" to connect to wireless
access point. Please input the same passphrase in two boxes
for confirmation.
When authentication type is any of 802.1X, you have to select
EAP type, tunnel, and provision mode from dropdown menu.
This setting must be identical with your 802.1x authentication
server.
Please input 802.1x related authentication information here.
If certification is required to authenticate with 802.1x
authentication server, please select a local certificate from
dropdown list.
Check this box and PAC (Privilege Access Certificate) will be
automatically selected.
‐
‐
22
PLANET 802.11n Wireless USB Adapter