Random Assemble Editing - JVC HR-J880EU Instructions Manual

54
EN
Random Assemble
Editing
Player
Audio signal
Another recorder
(with PAUSE connector)
Recorder
Your recorder
Video signal
Mini-plug cable
(not provided)
This function makes it easier to create edited videos when your
recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
connector. You can pre-program up to 8 scenes or "cuts" for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. ( pg. 55)
A
Make connections.
Connect your recorder's AV1 (L-1) IN/OUT connector to
the video and audio input connectors on the recording
deck, and connect your recorder's PAUSE/R.A.EDIT
connector to the PAUSE connector on the recording
deck.
If the recording deck does not have a PAUSE connector,
connect to the R.A.EDIT connector instead.
The Mini-plug cable is a mono 3.5 mm mini-plug to mono
3.5 mm mini-plug connector.
B
Set the input mode of recording deck.
Insert the cassette to be recorded on into the recording
deck and set the input mode of the recording deck.
C
Load the source cassette.
Insert the source cassette into your recorder.
Use a source cassette that is recorded in SP or LP mode.
D
Set the edit mode.
See "PICTURE CONTROL" on page 61.
E
Start playback of the source cassette.
4
Press .
F
Access the R.A.Edit screen.
Press MENU to access the Main Menu screen. Press
to move the highlight bar (pointer) to "R.A.EDIT", then
press OK.
The R.A.Edit screen is superimposed on the video playback in
step 7.
EDITING (cont.)
rt