Recording; Basic Recording - JVC HR-J870EU Instructions Manual

22
EN

Basic Recording

Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer

Recording (

pg. 23) or timer recording (
recording will resume automatically when power is restored
to the recorder unless the recorder's memory backup has
expired.
A
Insert a cassette with the record safety tab intact.
The recorder's power comes on automatically and the counter
is reset to "0:00:00".
While "– – – –" is blinking on the front display panel, the tape
will run for a few seconds to search for the tape number.
B
Press PR +/– or the number keys to select the channel
you wish to record.
C
Press SP/LP/EP (
the recorder's front display panel to confirm the selected
tape speed.
In EP mode, the recording time is extended three times.
If you record a programme in EP mode on this recorder, it is
recommended to play back the EP-recorded tape on this
recorder.
It is not possible to select EP mode if "COLOUR SYSTEM" is
set to "MESECAM"
D
Press and hold
press
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded (
E
Press
F
Press
Then press
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 26, 28), the
Load a cassette.
Choose a programme.
Set the tape speed.
p
). Check the SP/LP/EP indicator on
. (
pg. 59
Start recording.
7 4
and press
7
on the recorder.
pg. 25)
Pause/Resume recording.
9 4
. Press to resume recording.
Stop recording.
8
on the remote control or
0
to remove the cassette.
RECORDING
)
on the remote control, or
pg. 57).
0
on the recorder.
Record safety tab