Replacing The Waste Ink Cartridge - Brother GT-541 Basic Operation Manual

(18) Insert the Wiper Cleaner Cassette straight into your printer.
<Note>
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette); it may cause a
malfunction.
(19) Close the Front Cover, and then turn on your printer.
If your printer turns on without any problem, replacement of the Wiper Cleaner Cassette has been
completed.
If there is problem (abnormal noise or error), turn off your printer, and check if the Wiper Cleaner
and the Wiper Cleaner Cassette are correctly installed.

5-1-3. Replacing the Waste Ink Cartridge

When the message "WARNING WASTE INK FULL" is displayed, prepare the new Waste Ink
Cartridge, and replace it when the message "ERROR WASTE INK FULL" is displayed.
<Note>
Do not replace the Waste Ink Cartridge while printing or head cleaning. It may contaminate inside of
your printer, which may cause damages on your printer.
Be careful not to get ink on your hands or clothing when you handle the Waste Ink Cartridge.
(1) Pull out the Waste Cartridge Tray.
The message "ERROR NO WASTE INK TRAY" is displayed.
GT-541
5. Maintenance
43