13) Make sure the USB COVER is still open.
15) Separate the engine board from the B-COVER
ASSY by lifting the engine board in the direction
shown.
17) Open the clip of the FLEX SHIELDING with the SS-
93.
14
14) Use the SS-93 to detach the clips on top side of
the device. Be careful not to damage the
components on the engine board!
16) Use the tweezers to remove the CAMERA GASKET.
18) Remove carefully the FLEX SHIELDING with the
tweezers. The FLEX SHIELDING cannot be used again.
Be careful not to damage the components nearby!
Confidential Copyright © 2010 NOKIA All rights reserved
Nokia 6303i Classic
RM-638
Service Manual Level 1&2
Version 2.0
ISSUE 1