Advertisement
User guide
※ How to use
※ How to use
- easy instructions for everyone -
connect it to the
electric source
(The light of Muldori
(water-boy) charater is on.)
According to the container,
the corresponding indicator is automatically on.
The operation indicator is flashing in
regular sequence.
After 1 or 2 min., only the center of the operation indicator is blinking with "beep" sound, indicating the completion of the manufacturing process.
(informing twice at 30 sec. intervals.)
Although you press the START button again without using the manufactured water (without replacing the container), the device does not operate.
(Only the container indicator is blinking.)
In case of too much catalysis or too little water, with "beep" sound, the operation indicator and the stand-by mode indicator are blinking fast,
indicating warning.
Depending on the volume of catalysis, the property of water produced varies. (safe sterilization 1g/ general sterilization 2g/ strong sterilization 3g)
classification
after pouring water up to the max.
line of the container (1-1.2L), add 1-3g of
catalysis (salt or potassium carbonate)
the container on the main controller.
The indicator of "stand-by mode" is on.
Press the "START" button.
connect it to the electric source
(The light of Muldori (water-boy) charater is on.)
Advertisement
