Semi-Auto - JVC HR-J440U Instructions Manual

10
EN
1
¶
MENU
OK
2
q
1 2 3
4 5 6
7 8 9
0
CH
3 ¡
7 8
4 ¢
SHUTTLE PLUS

Semi-Auto

SELECT MODE
5
At the Override Auto
Clock Set screen, move the
highlight bar (arrow) to
"SEMI-AUTO CLOCK SET"
2
by pressing CH
SHUTTLE PLUS % fi , then
press OK.
6
5/8
ACCESS SELECT SCREENS
6
At the Semi-Auto Clock Set
screen, move the highlight
bar (arrow) to the desired
mode by pressing CH
or SHUTTLE PLUS % fi,
then press OK.
To select the Host Channel
— step 7
To select the Time Zone — step 8
To select the D.S.T. mode — step 9
NOTE:
The time that has been set previously by the Plug &
Play function will be erased when any of the three
settings mentioned above is changed.
SELECT HOST CHANNEL
7
You can either select
"AUTO", or enter a PBS
channel number. For
automatic selection, press
MENU if "AUTO" is
highlighted on the Host
Channel Select screen. To
manually select "AUTO" or
the PBS channel, press
CH
"AUTO" or the channel numbers (hold button down to
speed through numbers) and stop when the desired
number appears. Press MENU and the Semi-Auto Clock
Set screen reappears.
NOTES:
For cable box users: Select "AUTO" or the channel
on your VCR that receives the cable box channels,
and set the cable box to the PBS channel.
There are some PBS channels that do not transmit
clock setting data.
INITIAL SETTINGS (cont.)
OVERRIDE AUTO CLOCK SET
AUTO CLOCK SET
=SEMI–AUTO CLOCK SET
or
MANUAL CLOCK SET
= HOST CHANNEL SELECT
TIME ZONE SELECT
D.S.T. SELECT
or SHUTTLE PLUS % fi to cycle through
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
SEMI–AUTO CLOCK SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
HOST CHANNEL SELECT
(CATV)
CH AUTO
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END