Feature Programming Requirements; Function Menu Programming - Toshiba Strata DK Interface Manual

LinkPlus Interface Guide: Toshiba Strata DK/CTX System

Feature Programming Requirements

Function Menu Programming

10
When planning the interface, the following information must be taken
into account:
Line sequences
The handset uses two types of key sequences to access PBX features
and multiple lines. Line sequences are those where the user presses
the key and then a number key. The key-map design designates
LINE
"line" keys that should be programmed for line appearance so that
they correspond to line sequences on the handset.
The icon on the handset will reflect activity on the corresponding
LINE
deskset key. For this reason, it is recommended that line appearance
keys be used only for line access. If only one line is assigned to a
particular handset, leave the other designated line keys identified on
the key maps unassigned. The corresponding handset
sequences will then have no function.
Function sequences
Function sequences are those where the handset user presses the
key and then a number key. Designated "function" deskset keys
programmed to system features such as Transfer and Conference may
have their corresponding menu items display on the handset function
menu. See the key-map diagram for the function keys that are
available for feature programming.
SpectraLink 6300 MCU
The function menu text defaults for the handsets associated with the
SpectraLink 6300 MCU can be changed via the SpectraLink Operator's
Console.
+ key
LINE
FCN
PN: 1725-36145-001_D.doc