MTD 250 Operator's Manual page 7

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
6. Squeeze the tine clutch control inward.
Insert right end into the hole on the right side
of the upper handle, Figure 3-5.
Figure 3-5: Install right end of tine clutch control.

www.mymowerparts.com www.mymowerparts.com
3
Assembly
NOTE: Stand behind
the tiller as if you were
going to operate it. Your
right hand corresponds
to the right side of the
tiller; your left hand
corresponds to the left
side of the tiller.
NOTE: This operator's
manual may cover
various models of tillers.
The units illustrated may
vary slightly from your
unit.