Table of Contents
Advertisement
Names and Uses of the Parts
Names and Uses of the Parts
Front View
A
Link LED (green)
Status LED
B
(orange)
Wireless LED
C
(green)
Wireless LAN
D
Antenna
E
Reset Button
F
Network Port
G
USB Port
H
Power Port
I
MAC Address
12
Installation Instructions
1 2 3
The LAN settings (WEP (encryption) key, SSID etc.)
Blinking
of the Wireless Kit do not match for the wireless
network.
Off
Operating
Lit
Sending and receiving data
Blinking
Operating
An antenna for wireless communication.
You can return the settings to factory default by pressing this reset
button.
For details, refer to "Returning Settings to the Factory
Default" (Page 26).
For use by service personnel. Do not use this port.
Connect the elite Panaboard to the Wireless Kit using a USB cable.
Do not connect devices other than an elite Panaboard.
Connect the power cable from the elite Panaboard.
The Wireless Kit receives power from the elite Panaboard. Do not
connect another external power source.
The MAC address (Ethernet address) of the Wireless Kit.
Rear View
4
5 6
7
8
9
Advertisement
Table of Contents
