Draytek Vigor2925 Series User Manual page 86

Dual-wan security router

Hide thumbs Also See for Vigor2925 Series:

Table of Contents

Click Setup link for WAN2.

Check Enable UDP Bandwidth Control on the bottom to prevent enormous UDP traffic

influent other application. Click OK.

If the worker has connected to the headquarter using host to host VPN tunnel. (Please

refer to Chapter 3 VPN for detail instruction), he may set up an index for it. Enter the

Class Name of Index 3. In this index, he will set reserved bandwidth for 1 VPN tunnel.

Vigor2925 Series User's Guide