Geemarc Ampli555 Manual page 33

MEMO key should be pressed and held in the whole process.
Release the MEMO key to end the recording.
Set the Ring Number
The ring number is the number of rings after the answering
machine takes an incoming call and plays your OGM. You can
select from 2 to 6 rings or toll saver mode. If you select toll saver,
when there are new messages to be played, the answering
machine will respond after 2 rings, otherwise it will respond after 6
rings.
1. Press Menu soft key to display the main menu list.
p or q
2. Press
Select soft key.
p or q
3. Press
key.
p or q
4. Press
2~Rings 6 or toll saver), press Select soft key.
Security ID
To operate your answering machine remotely from another phone
you need to enter the remote code. For security reasons you had
better change this code (the default one is 0000). For more details
please refer to par. Remote Control.
1. Press Menu soft key to display the main menu list.
p or q
2. Press
Select soft key.
p or q
3. Press
key.
4. The display shows the current security ID. Enter the new one
you want to use, press Save soft key.
ICM Voice Slow
You can use the menu to activate the ICM voice slow function if
you want to play the ICM slowly.
1. Press Menu soft key to display the main menu list.
p or q
2. Press
Select soft key.
MENU FUNCTIONS
key repeatedly to move to TAM setup, press
key to choose Set Ring, press Select soft
key to choose the answer rings (Rings
key repeatedly to move to TAM setup, press
key to choose Security ID, press Select soft
key repeatedly to move to TAM setup, press
32